| |
|
| |
| |
| |
| |
| |
| |
| Welding Technology for Engineers and Supervisors |
| Course Content : |
Schedule : |
- Welding Processes
- Basic Welding Metallurgy
- Weldability of metals-Ferrous and non-Ferrous
- Weld defects-their causes and remedies
- Classification & coding of electrodes
- Quality Assurance of Weldments
- Weld design, Welding Economics, Welding Symbol and Heat Treatment
- Safety in welding
|
| EWI/WE/01 |
1ST MONDAY OF EVERY MONTH |
1 WEEK |
|
This session will be based on 80% theoretical inputs and 20% practical inputs.
|
| |
| |
| Reclamation Welding Technology for Engineers and Supervisors |
| Course Content : |
Schedule : |
- Concept of Terrotechnology and Tribology
- Welding Metallurgy
- Welding Reclamation Processes
- Properties and uses of Welding Reclamation Alloys
- Type of wear and selection of Reclamation Consumables
- Welding of cast iron and non ferrous components
Preheat, post heat and post weld heat treatment
- Thermal spray processes and applications
- Reclamation Economics & Reclamation Case studies
|
| EWI/WE/02 |
2ND WEDNESDAY OF EVERY MONTH |
3 DAYS |
|
| This session will be based on 80% theoretical inputs and 20% practical inputs. |
| |
| |
Productivity Through Mig/Mag Process for Engineers and supervisors |
| Course Content : |
Schedule : |
- GMAW Process
- Functions of equipment, power source, torch,shielded gas and selection
- Installation of the equipment, functions of various controls
- Welding procedures ,modes of metal transfer,voltage and current setting
- Types of Consumable Wires and their specifications
- Weld defect,-their causes & remedies
- Advantages and limitations of GMAW processes,welding of ferrous and non-ferrous metals
|
| EWI/WE/03 |
2ND WEDNESDAY OF EVERY MONTH |
3 DAYS |
|
This session will be based on 70% theoretical inputs and 30% practical inputs.
|
| |
| |
| Welding Inspection for Engineers and Supervisors |
| Course Content : |
Schedule : |
- Basic Welding processes,Equipment & Consumables
- Basic welding Metallurgy & Weldability
- Weld defects - causes & remedies
- Weld quality Welding procedure Sheet, Approval of Welding procedure
- Standards used - ASME, IS – 9595, IS – 7307 etc.
- Testing - Nondestructive and Destructive tests
|
| EWI/WE/04 |
3RD WEDNESDAY OF EVERY MONTH |
3 DAYS |
|
| This session will be based on 80% theoretical inputs and 20% practical inputs.
|
| |
| |
| Welding Technology for Marine Engineers |
| Course Content : |
Schedule : |
- Chronological development in welding.
- Oxy-fuel cutting ,Welding and Brazing – Processes
- MMAW Process
- Basic Welding Metallurgy-Weldability of metals
( Ferrous & Non ferrous)
- Joint design & Weld symbols, Heat treatment
- Weld defects – Causes & Remedies
- Quality assurance of weldments
- Reclamation & repair welding
- Welding Safety
|
| EWI/WE/05 |
2ND MONDAY OF EVERY MONTH |
2 WEEKS |
|
| This session will be based on 60% theoretical inputs and 40% practical inputs.
|
| |
| |
| Refreshers Course on Welding Technology for Senior Marine Engineers |
| Course Content : |
Schedule : |
- Welding Processes
- Basic Welding Metallurgy
- Weldability of metals-Ferrous and non-Ferrous
- Weld defects-their causes and remedies
- Classification & coding of electrodes
- Quality Assurance of Weldments
- Weld design, Welding Economics, Welding Symbol & Heat treatment
- Reclamation Welding Technology
- Safety in welding
|
| EWI/WE/06 |
3RD MONDAY OF EVERY MONTH |
1 WEEK |
|
| This session will be based on 60% theoretical inputs and 40% practical inputs.
|
| |
| |
Welding Technology for Supervisors |
| Course Content : |
Schedule : |
- Welding Processes
- Basic Welding Metallurgy
- Weldability of metals-Ferrous and non-Ferrous
- Weld defects-their causes and remedies
- Classification & coding of electrodes
- Quality Assurance of Weldments
- Weld design, Welding Economics, Welding Symbol & Heat treatment
- Safety in welding
- Welding cost control
|
| EWI/WE/07 |
2ND MONDAY OF EVERY MONTH |
2 WEEKS |
|
| This session will be based on 80% theoretical inputs and 20% practical inputs.
|
| |
| |
