|
 |
| |
 |
| |
| COBALARC 1M |
|
|
|
| |
| Preformed Carbides to Resist High Stress Abrasion |
| Cobalarc 1 M is the ultimate in welding technology. |
| |
| It has autogenous fume shielding over preformed
carbides in a tubular form, which gives the user genuine
low heat input and infinite shelf life by dint of its nonhygroscopic
coating. |
| |
| It deposits fine chromium carbides in tough austenitic
matrix and gives better abrasion resistance on mild
and low alloy steel bases where impact requirement is
limited. This will ensure excellent wear resistance on
12-14% manganese steel components. |
| |
| SPOT COLOUR: YELLOW |
| |
| ALLOY BASE |
| Fe, C, Cr, Si |
| |
| SPECIAL FEATURES |
- Exceptional resistance to severe abrasion and
moderate impact
- Oxidation resistance at elevated temperatures
- Unmatched deposition rates - high integrity
deposits
- Compared to solid cored electrodes, the current
requirement is low so the dilution by parent metal is
contained to a minimum
- Non-hygroscopic coating needs no storage
precaution – infinite shelf life
|
| APPLICATIONS |
| I.D. fan blades, impeller casings, dredger bucket lips,
crusher jaws, bulldozer cutting edges, muller tyres,
sizing screens, pulveriser and crusher hammers, ball
mill liner plates, scraper blades, crane grab shovel,
dragline bucket lips, points and cutting edges, teeth
augers, conveyor chains, rolling mill guides, agriculture
implements. The electrode is suitable for 12-14%
manganese steel parts and also for carbon steel
parts when resistance to abrasion is required. Also for
applications which call for oxidation resistance. |
| |
| PROPERTIES |
|
| |
|
|
| CURRENT RANGE : (AC 70, DC+/-) |
| |
| 5.0 |
400 |
90-130 |
| 6.3 |
400 |
120-140 |
| 8.0 |
450 |
140-170 |
| 10.0 |
450 |
180-200 |
|
| |
| |
| |
| |
| More Info... |
| |
|
