|
 |
| |
 |
| |
| RUPATAM 14 |
|
|
|
| |
| Brazing of Brass, Bronze, Molybdenum and Silver |
| |
| SPECIAL FEATURES |
- Rupatam 14 is used for obtaining strong, clean and
high tensile brazed joints in brasses, bronzes. It also
effectively joins silver and molybdenum
- It is not recommended for ferrous metals or alloys
of high nickel content due to the possibility brittle
phosphide formation
- Flame should be slightly oxidizing on Cu and neutral
on Cu alloys
- The deposit obtained has a high tensile strength
|
|
| APPLICATION |
| Extensive employment of the alloy in electrical engineering
for joints in motor windings, wires and cables, braided
conductor and other conductor assemblies where any
risk of corrosion by flux constituents must be avoided. |
| |
| FLUX |
| No flux for brazing of Cu. In other cases use Rupatam
A. |
| |
| PROPERTIES |
| Melting Range |
: |
643-802°C |
| Electrical conductivity |
: |
8% I.A.C.S. |
|
| |
| |
| More Info... |
| |
|
