OK Flux 10.63
OK Flux 10.63 is an agglomerated, high-basic flux for submerged arc welding. It is used for multi-run welding of creep resistant Cr-Mo-alloyed steels when high toughness values are required, even after step cooling heat treatment. It can be used for single and multi-wire procedures, for butt and fillet welds and works equally well on DC and AC current. The flux is neutral in terms of Si and Mn alloying and thus it is perfect for multi-layer welding of unlimited plate thicknesses. It is well suited for narrow gap welding, due to good slag detachability and smooth sidewall blending. The optimum voltage is at the lower end of the voltage range. The weld metal produced has a very low level of impurities with well controlled X-factors. It has a low oxygen content, approx. 300ppm and hydrogen levels lower than 5ml/100g. OK Flux 10.63 is used in the petrochemical, chemical, power generation, pressure vessels industries etc.
Classifications
Grade | S A FB 1 55 AC H5 |
Name | EN ISO 14174 |
Approvals
Country | PL |
Grade | RD 03-613-03 |
Society | NAKS/HAKC |
Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
Alloy Transfer | No Silicon or Manganese alloying |
Basicity Index | nom: 3.0 |
Density | nom: 1.1 kg/dm3 |
Diffusible Hydrogen | max 5 ml /100g weld metal (Redried flux) |
Grain Size | 0.2-1.6 mm (10x65 mesh) |
Slag Type | Fluoride-basic |
Flux Consumption
Volts | kg Flux / kg Wire DC+ | kg Flux / kg Wire AC |
26 V | 0.7 kg | 0.6 kg |
30 V | 1.0 kg | 0.9 kg |
34 V | 1.3 kg | 1.2 kg |
38 V | 1.6 kg | 1.4 kg |
Amps | Dimensions | Travel Speed |
580 A | Ø 4.0 mm | 55 cm/min |
Classifications
Wire | SFA/AWS - EN ISO | AWS - PWHT |
OK Autrod 13.20 SC | A5.23: EB3R / 24598-A: S S CrMo2 | A5.23: F8P8-EB3R-B3R |
OK Autrod 13.10 SC | A5.23 :EB2R / 24598-A: S S CrMo1 | A5.23: F8P4-EB2R-B2R |
*Selected production units only. Please contact ESAB for more information. Visit esab.com to download specific flux/wire combination fact sheets for more details. |
Typical Mechanical Properties
Combined with Wire | Condition | Yield Strength | Tensile Strength | Charpy V-Notch | Elongation |
OK Autrod 13.10 SC | Stress Relieved AWS DC+ | 500 MPa | 600 MPa | 200 J 150 J 140 J |
27 % |
OK Autrod 13.20 SC | Stress Relieved AWS DC+ | 530 MPa | 630 MPa | 150 J 110 J 50 J |
25 % |
Typical Weld Metal Analysis %
Typical Weld Metal Analysis % | ||||||||||||||
C | Cr | Mn | Mo | Si | X-bar | |||||||||
OK Autrod 13.10 SC AC, 565A, 30V | ||||||||||||||
0.08 % | 1.15 % | 0.85 % | 0.50 % | 0.20 % | <= 12 ppm % | |||||||||
OK Autrod 13.10 SC DC+, 485A, 30V | ||||||||||||||
0.075 % | 1.10 % | 0.80 % | 0.50 % | 0.25 % | <= 12 ppm % | |||||||||
OK Autrod 13.20 SC AC, 580A, 29V | ||||||||||||||
0.08 % | 2.10 % | 0.60 % | 1.00 % | 0.20 % | <= 15 ppm % | |||||||||
OK Autrod 13.20 SC DC+, 580A, 29V | ||||||||||||||
0.07 % | 2.10 % | 0.60 % | 1.00 % | 0.20 % | <= 15 ppm % |
How to purchase OK Flux 10.63
We're as eager to put ESAB gear in your hands as you are to have it. That's why we sell our products with distributors who'll give you the attention, support, and value you deserve. Their expertise will make sure that you're as happy with the purchasing process as we know you'll be with your purchase itself.
To make things even easier, we've developed the online shopping list below. As you browse our site, you'll be able to click on any product to have it added to this easy reference sheet. And when you're done, you can send the list to yourself or print it out and bring it in to the distributor of your choice.
To find an ESAB distributor, just use the distributor locator tool featured on every page of our site. Alternatively, you can call our support line at +361 382 1235 and we'll point you in the right direction.