This site uses cookies and other tracking technologies to provide you with our services, enhance the performance and functionality of our services, analyze the use of our products and services, and assist with our advertising and marketing efforts.

Cookie Policy   Privacy Notice

Previous Next

MIG/MAG Wires (GMAW)

ALL_PRODUCTS_MODE

ESAB
ESAB MW1
ESAB MW1
ESAB MW1 is a copper coated, Mn-Si alloyed solid wire for GMAW of non alloyed steels, used in general construction, automotives, ship building and pressure vessel fabrication. The wire has a carefully controlled wire c ... [Read more]
ESAB
ESAB MW2
ESAB MW2
ESAB MW2 is a low alloyed (0.5% Mo) solid wire for Gas Metal Arc Welding of high strength steels. The wire can be welded with mixture of Ar-CO2 or with CO2 as the shielding gas. The wire is suitable for welding of high ... [Read more]

OK AristoRod 12.50
The non copper coated OK AristoRod 12.50 is a manganese-silicon alloyed solid wire for GMAW of unalloyed steels, such as general structural, pressure vessel, ship building and for fine-grained carbon-manganese steels f ... [Read more]
ESAB
OK AristoRod 12.63
OK AristoRod 12.63
OK AristoRod 12.63 is a bare Mn-Si-alloyed G4Si1/ER70S-6 solid wire for the GMAW of non-alloyed steels, as used in general construction, automotive components, pressure vessel fabrication and shipbuilding. It has a sli ... [Read more]

ESAB
OK AristoRod 13.09
OK AristoRod 13.09
OK AristoRod 13.09 is a 0.5Mo-alloyed, bare, solid wire for the GMAW of creep-resistant steels of the same composition, like those used for pipes in pressure vessels and boilers with a service temperature of up to 500°C. ... [Read more]
ESAB
OK AristoRod 13.12
OK AristoRod 13.12
OK AristoRod 13.12 is a 1.1Cr-0.5Mo-alloyed, bare, solid wire for the GMAW of creep-resistant steels of the same composition, like those used for pipes in pressure vessels and boilers with a service temperature of up to 450°C. ... [Read more]

ESAB
OK AristoRod 13.16
OK AristoRod 13.16 is a low-alloyed, chromium-molybdenum (1,3% Cr, 0,5% Mo) ER80S-B2, solid wire for GMAW of creep resistant steels like SA-387 Grade 11, A 335 Grade P11 or similar materials. OK AristoRod 13.16 is a hi ... [Read more]
ESAB
OK AristoRod 69
OK AristoRod 69
The non-copper-coated OK AristoRod 69 is a low-alloyed, chromium-nickel-molybdenum (0,3% Cr, 1,4% Ni, 0,25% Mo), solid wire for GMAW of high tensile strength steels requiring tough weld metal for critical applications. ... [Read more]

ESAB
OK AristoRod 89
OK AristoRod 89
The non copper coated OK AristoRod 89 is a low-alloyed, chromium-nickel-molybdenum (0,4% Cr, 2,2% Ni, 0,55% Mo), solid wire for GMAW of ultra high tensile strength steels requiring tough weld metal for critical applications. ... [Read more]
ESAB
OK Autrod 1100
OK Autrod 1100 is highly resistant to chemical attack and weathering. It is a relatively soft alloy that is very formable and is used extensively in thin gauge and foil products. It has good welding characteristics. A ... [Read more]

ESAB
OK AUTROD 13.14
OK AUTROD 13.14
OK AUTROD 13.14 is a copper coated low alloyed wire for GMAW of HSLA steels. It is used for fabrication of tractor cylinder, automobile components and wagons. The wire is designed to produce excellent beads of radiogra ... [Read more]
ESAB
OK Autrod 13.17
OK Autrod 13.17
OK Autrod 13.17 is a 2.5Cr-1.1Mo-alloyed (ER90S-B3), copper-coated, solid wire for the GMAW of creep-resistant steels like SA-387 Grade 22, A335 Grade P22 or similar materials. The wire has a high purity chemistry with ... [Read more]

ESAB
OK Autrod 13.28
OK Autrod 13.28
A copper coated, Ni-alloyed (2,4% Ni), solid wire for GMAW of low-alloyed and low temperature steels in applications such as vessels, pipes and in the offshore industry with a minimum yield strength less than 470 Mpa. ... [Read more]
ESAB
OK AUTROD 16.11
"A corrosion-resistant, chromium-nickel alloyed solid wire for welding stabilized austenitic chromium-nickel alloys of 18Cr-8Ni type. OK AUTROD 16.11 has good general corrosion resistance. The alloy is stabilized with ... [Read more]

ESAB
OK AUTROD 16.30
A corrosion resistant, chromium-nickel-molybdenum alloyed solid wire for welding austenitic stainless alloys of the 18Cr-12Ni-2.5Mo type. The alloy has very good resistance to corrosion in acid and chlorinated environments. ... [Read more]
ESAB
OK AUTROD 16.53
A corrosion resistant, chromium-nickel alloyed solid wire for joining stainless steels to non-alloy or low-alloy steels and for welding austenitic stainless alloys of the 24Cr-13Ni types. The alloy is also used for wel ... [Read more]

ESAB
OK Autrod 16.95
OK Autrod 16.95
A continuous solid, corrosion resisting chromium-nickel-manganese wire for welding of austenitic stainless alloys of 18% Cr, 8% Ni, 7% Mn types. OK Autrod 16.95 has a general corrosion resistance similar to that of the ... [Read more]
ESAB
OK Autrod 19.12
OK Autrod 19.12
A continuous, solid, copper wire for the GMAW joining of oxygen-free, pure copper and low-alloyed copper. OK Autrod 19.12 is alloyed with tin and has good flow properties. OK Autrod 19.12 is normally welded with pure Ar ... [Read more]

ESAB
OK Autrod 19.30
OK Autrod 19.30
A continuous, solid, copper wire for the GMAW joining of copper-zinc alloys and low-alloyed copper and for the GMAW brazing of zinc-coated steel sheets. OK Autrod 19.30 is alloyed with silicon and manganese and has good ... [Read more]
ESAB
OK Autrod 19.40
OK Autrod 19.40
A continuous, solid, copper wire for the GMAW joining of aluminium bronzes. OK Autrod 19.40 is alloyed with aluminium and is recognised for its high strength, good wear resistance and very good corrosion resistance, pa ... [Read more]

ESAB
OK Autrod 385
OK Autrod 385
A continuous, solid, corrosion-resistant, chromium-nickel-molybdenum-copper wire for welding austenitic stainless alloys of the 20% Cr, 25% Ni, 5% Mo, 1.5% Cu, low C types. OK Autrod 385 weld metal has good resistance ... [Read more]
ESAB
OK Autrod 4043
OK Autrod 4043 is one of the most widely used welding and brazing alloys and can be classed as a general purpose filler alloy. The silicon additions result in improved fluidity (wetting action) to make the alloy a pref ... [Read more]

ESAB
OK Autrod 5183
OK Autrod 5183 was developed to provide the highest strengths possible in the as welded condition of alloy AA 5083 and other similar high magnesium alloys. The more common OK Autrod 5356 will typically fail to meet the as ... [Read more]
ESAB
OK Autrod 5356
OK Autrod 5356 is the most widely used welding alloy and can be classified as a general purpose type filler alloy. OK Autrod 5356 is typically chosen because of its relatively high shear strength. The 5XXX alloy base material, ... [Read more]

ESAB
OK Autrod 5554
OK Autrod 5554
OK Autrod 5554 is a solid aluminium wire with a content of 2.7% Mg. It is recommended for welding AlMg alloys like 5454. Typical applications include chemical storage tanks, automotive components like wheels and frame sections. ... [Read more]
ESAB
OK Autrod 5556A
OK Autrod 5556A
Continuous solid wire suitable for welding aluminium alloys with up to approx. 5% Mg that are not age hardenable and alloys where a higher tensile strength is required. The corrosion resistance in a marine atmosphere is high.
[Read more]

ESAB
OK Autrod Ni-1
A continuous solid nickel based electrode alloyed with about 3% Ti for welding of high purity nickel (min 99.6%Ni), ordinary wrought nickel and nickel with reduced C content. The weld metal can be used in a wide range ... [Read more]
ESAB
OK Autrod NiCr-3
OK Autrod NiCr-3
Continuous solid Ni-Cr wire for welding of high alloyed heat-resisting and corrosion resisting materials, 9% Ni-steels and similar steels with high notch toughness at low temperatures. Also for joining of dissimilar me ... [Read more]

ESAB
OK Autrod NiCrMo-3
A continuous solid corrosion and heat-resisting Ni-Cr-Mo wire for welding of high alloyed heat-resisting and corrosion resisting materials, 9% Ni-steels and similar steels with high notch toughness at low temperatures. ... [Read more]
ESAB
OK Autrod NiCu-7
A continuous solid nickel based electrode alloyed with 30% Cu for welding of base materials of the same type. Can also be used to join these alloys to steel. The weld metal has good resistance to flowing seawater and h ... [Read more]

ESAB
OK Autrod NiFeCr-1
OK Autrod NiFeCr-1 is developed for overlay welding of low alloy steel pipes in the oil and gas industry. OK Autrod NiFeCr-1 can also be used to join 825 and materials of similar chemical composition using GTAW and GMAW.
[Read more]
Stoody
Stoody HB-56
Stoody HB-56
Stoody HB-56 is a general purpose non-cracking hardbanding alloy that offer high hardness in a casing friendly deposit. HB-56 offers a balance of impact and abrasion resistance and can be applied to carbon and low all ... [Read more]

ESAB
Weld G3Si1
A copper coated, G3Si1 solid wire for GMAW of all general structural and engineering unalloyed and low-alloyed carbon-manganese steels. The electrode may be welded with either a gas mixture or with pure CO2 as the shie ... [Read more]
×
x
x

x

Loading..