m2 200i Plasma Cutting Systems

ESAB

m2 200i Plasma Cutting Systems


ESAB m2 200i
Easy-to-use, 200 amp mechanized plasma system for production cutting of mild steel, stainless steel and aluminum. Manual Gas Control allows plasma and secondary gas pressures to be precisely controlled at the power supply with individual regulators. Plasma gas can either be Air, Oxygen, Nitrogen, or Argon- Hydrogen (manual change required).

Lower Cost per Part
High cutting speeds and cut quality with minimal dross, reduced warping and a small heat-affected zone results in fewer secondary operations further reducing the overall costs of production. Use air plasma gas for the lowest possible cost per part, choose oxygen or nitrogen when the application demands higher cut quality.

Superior Reliability
A full 100 percent duty cycle enables the system to handle the most demanding production requirements with the highest reliability. The SpeedLok design of the m2 200i torch provides the fastest consumable change in the industry and concentricity for repetitive cut quality.


Features

  • Micro-Processor Controlled 200 amp plasma system for heavy-duty mechanized cutting applications
  • Only plasma system in this range that offers WMS (Water Mist Secondary) for excellent cut quality on non-ferrous materials
  • Patented SpeedLok™ Torch for fast consumable changes
  • Fan and pump on demand technology enhances reliability


Specifications

Cutting Specifications

Maximum Edge Start 2 in. (50 mm)
Pierces 1.25 in. (35 mm)

Dimensions

Height 48.0 in. (1219 mm)
Length 40.6 in. (1031 mm)
Width 27.5 in. (698 mm)

Input Ratings

Amps 63 A
Frequency Hz 50/60 Hz
Phase 3
Volts 380 V
Amps 60 A
Frequency Hz 50/60 Hz
Phase 3
Volts 400 V

Operating Specifications

Air Service Gas, Plasma Air, O2, Ar-H2, N2 @ up to 120 psi (8.3 bar)
Air Service Gas, Shielding Air, N2 @ up to 120 psi (8.3 bar)
Application Classification CSA, CE, CCC
Open Circuit VAC High 425 VAC

Water Mist Secondary (WMS)

Minimum Water Supply 0.6 l/min (10 gal/min)
x
m2 200i Plasma Cutting Systems

Cutting Specifications

Maximum Edge Start 2 in. (50 mm)
Pierces 1.25 in. (35 mm)

Dimensions

Height 48.0 in. (1219 mm)
Length 40.6 in. (1031 mm)
Width 27.5 in. (698 mm)

Input Ratings

Amps 63 A
Frequency Hz 50/60 Hz
Phase 3
Volts 380 V
Amps 60 A
Frequency Hz 50/60 Hz
Phase 3
Volts 400 V
Amps 50 A
Frequency Hz 50/60 Hz
Phase 3
Volts 480 V

Operating Specifications

Air Service Gas, Plasma Air, O2, Ar-H2, N2 @ up to 120 psi (8.3 bar)
Air Service Gas, Shielding Air, N2 @ up to 120 psi (8.3 bar)
Application Classification CSA, CE, CCC
Open Circuit VAC High 425 VAC

Water Mist Secondary (WMS)

Minimum Water Supply 0.6 l/min (10 gal/min)

Output Ratings

(@ 104ºF / 40º C)

Amp High 200 A
Amp Low 5 A
Duty Cycle 100 %
Output Current DC 200 A
Output Power 40 kW
VDC Out 170 VDC

Weight

Weight 215 kg (475 lb)
x

Interested in this product? Contact us.

Contact us online

Head-Office

13, 3rd Main Road,
Industrial Estate,
Ambattur, Chennai - 600 058.
Tel +91 44 4228 1100
Fax +91 44 4228 1150

North : New Delhi, Haryana, Punjab,
Himachal Pradesh, Jammu & Kashmir, Uttarakhand, Uttar Pradesh and Rajasthan


Esab India Limited,
139 & 140, DLF Tower, Shivaji Marg,
New Delhi- 110 015.
Tel +91 11 4142 7091

East : West Bengal, Odisha, Jharkhand, Bihar and North-East

P-41, Taratala Road,
Kolkata - 700 088.
Tel +91 33 2401 2103

West : Mumbai
Telephone number : +91 9967753877

South : Tamil Nadu, Pondicherry, Kerala, Karnataka, Telangana and Andhra Pradesh

13, 3rd Main Road,
Industrial Estate,
Ambattur, Chennai - 600 058.
Tel +91 44 4340 4809

Central : Maharashtra, (only Nagpur & Vidarbha), Madhya Pradesh and Chattisgarh

No. 218, Ashirvad, South Ambazari Road,
Bajaj Nagar, Nagpur - 440 010
Tel +91 712 222 9547

x
×
x

x

Loading..