Stoody Build-Up LH
Stoody Build-Up LH deposit is a low alloy steel designed for low severity metal-to-metal wear. The electrode has a special low hydrogen coating which provides a high strength fusion bond on carbon and low alloy steels. As a base alloy for hardsurfacing overlays or for restoring parts to original dimensions, it provides a weld deposit with excellent compressive strength capable of absorbing heavy impact and/or compressive loads.
Features
- It can be applied in multiple layers without cracking, spalling, or mushrooming.
- It is machinable in the as-welded condition with reasonable procedural care and can be forged at red heat.
- It is not recommended for manganese steel or cast iron and does not work harden.
- It should not be used for joining.
Typical Tensile Properties
| Elongation | Tensile Strength | Yield Strength |
| 6 % | 815 MPa (118 ksi) | 780 MPa (113 ksi) |
Deposition Data
| Current | Deposition Type | Diameter |
| 100-185 A | Full Range | 3.2 mm (1/8 in.) |
| 140-250 A | Full Range | 4.0 mm (5/32 in.) |
| 180-310 A | Full Range | 4.8 mm (3/16 in.) |
| 200-360 A | Full Range | 6.4 mm (1/4 in.) |
Typical Weld Metal Analysis %
| C | Cr | Fe | Other |
| 0.1 % | 2.0 % | BAL % | 2.0 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.