Pipeweld 6010 Plus
Cellulosic-coated electrode designed for welding of pipes and pipelines in all positions using conventional and stovepipe techniques. Deep penetration in all positons especially vertical down. Suitable for welding pipe steels API 5L up to X56, root pass up to X80. Even though DC+ is advised and easier to control, DC- can be used for root run.
Typical Charpy V-Notch Properties
| as welded aws | ||||
Typical Tensile Properties
| Condition | Elongation | Shielding Gas | Tensile Strength | Yield Strength |
| As Welded | 22 % | AWS | 590 MPa (86 ksi) | 480 MPa (70 ksi) |
Deposition Data
| Current | Deposition Rate @ 90% I max | Diameter | Deposition Efficiency (%) | Number of electrodes/kg weld metal | Voltage | |
| 60-80 A | 54 sec | 0.7 kg/h (1.5 lb/h) | 2.5 x 350.0 mm (0.098 x 13.8 in.) | 79 % | 100 | 34 V |
| 75-130 A | 57 sec | 1.0 kg/h (2.2 lb/h) | 3.2 x 350.0 mm (1/8 x 13.8 in.) | 69 % | 67 | 25 V |
| 100-190 A | 58 sec | 1.2 kg/h (2.6 lb/h) | 4.0 x 350.0 mm (5/32 x 13.8 in.) | 63 % | 50 | 30 V |
| 160-240 A | 65 sec | 1.9 kg/h (4.2 lb/h) | 5.0 x 350.0 mm (0.197 x 13.8 in.) | 71 % | 29 | 28 V |
Classifications
| Classifications |
SFA/AWS A5.1 : E6010 EN ISO 2560-A : E 38 2 C 21 |
Approvals
| Grade | E 6010 |
| Society | FBTS |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Carbon Manganese |
| Coating Type | Cellulosic covering |
| Welding Current | DC+(-) |
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| C | Mn | Si | ||||||||||||
| 0.11 % | 0.44 % | 0.13 % | ||||||||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.