Arcaloy 309L-17 PLUS
Arcaloy 309L-17 Plus electrodes have a heavy coating and produce a concave bead with minimal ripple. The slag is virtually self-cleaning. For welding carbon steel to stainless steel for service below about 315°C (600°F) and for the first layer when cladding.
Industries
- Industrial and General Fabrication
Typical Tensile Properties
Elongation | Tensile Strength | Yield Strength |
(in 2") 37 % | 590 MPa (85 ksi) | 450 MPa (65 ksi) |
Recommended Welding Parameters
Flat Amps | Overhead Amps | Vertical Amps | Wire Diameter | |
60-85 A | 40-60 A | 35-50 A | 2.4 mm (3/32 in.) | |
90-120 A | 60-85 A | 55-70 A | 3.2 mm (1/8 in.) | |
140-165 A | 95-120 A | 85-100 A | 4.0 mm (5/32 in.) |
Approvals
Approvals |
ASME II SFA A5.4 E309L-17/E309-17 ASME IX F No. 5 AWS A5.4 E309L-17/E309-17 CWB E309L-17 |
Approvals are based on factory location. Please contact ESAB for more information. |
Typical Weld Metal Analysis %
Typical Weld Metal Analysis % | ||||||||||||||
C | Cr | Cu | Mn | Mo | Ni | Si | ||||||||
0.025 % | 23.5 % | 0.1 % | 0.6 % | 0.1 % | 13.5 % | 0.7 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.