OK 68.17
Typical Charpy V-Notch Properties
stress relieved iso | ||||
8 hr | ||||
8 hr | ||||
8 hr |
Typical Tensile Properties
Condition | Elongation | Shielding Gas | Tensile Strength | Testing Temperature | Testing Time | Yield Strength |
Stress Relieved | 17 % | ISO | 870 MPa (126 ksi) | 600 degC (1112 degF) | 8 hr | 650 MPa (94 ksi) |
Deposition Data
Current | Deposition Rate @ 90% I max | Diameter | Deposition Efficiency (%) | Number of electrodes/kg weld metal | Voltage | |
55-100 A | 61 sec | 0.8 kg/h (1.8 lb/h) | 2.5 x 350.0 mm (0.098 x 13.8 in.) | 62 % | 73 | 21 V |
65-135 A | 66 sec | 1.2 kg/h (2.6 lb/h) | 3.2 x 350.0 mm (1/8 x 13.8 in.) | 59 % | 45 | 21 V |
90-190 A | 92 sec | 1.7 kg/h (3.7 lb/h) | 4.0 x 450.0 mm (5/32 x 17.7 in.) | 59 % | 23 | 24 V |
Classifications
Classifications |
EN 14700 : E Fe7 EN ISO 3581-A : E 13 4 R 3 2 SFA/AWS A5.4 : E410NiMo-16 Werkstoffnummer : 1.4351 |
Approvals
Grade | UNA 272580 |
Society | Seproz |
Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
Alloy Type | Martensitic 13Cr4Ni-Mo type |
Coating Type | Rutile Basic |
Diffusible Hydrogen | <8.0 ml/100g |
Welding Current | DC+, AC |
Typical Weld Metal Analysis %
Typical Weld Metal Analysis % | ||||||||||||||
C | Cr | Mn | Mo | Ni | Si | |||||||||
0.02 % | 12.0 % | 0.6 % | 0.6 % | 4.6 % | 0.4 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.