Dual Shield 700X
Dual Shield 700X is a high deposition, deep penetration wire for joining of heavy structural steel components. Designed for flat and horizontal position welding using CO2 shielding gas, this X Series wire provides high deposition rates, high efficiency and excellent performance. The bead contour, smooth ripple and slag chemistry allow easy slag removal even in narrow groves.
Industries
- Agricultural Equipment
- Mobile Equipment
- Heavy Equipment
- Large Components
Welding Process
- FCAW (Flux Core)
Typical Charpy V-Notch Properties
as welded 100% co2 | ||||
Typical Tensile Properties
Condition | Elongation | Shielding Gas | Tensile Strength | Yield Strength |
As Welded | 29 % | 100% CO2 | 600 MPa (87 ksi) | 545 MPa (79 ksi) |
Recommended Welding Parameters
Current | TTW Dist. | Voltage | Wire Diameter | Wire Feed Speed |
100% CO2 | ||||
180-460 A | 19-25.4 mm (3/4-1 in.) | 25-34 V | 1.6 mm (1/16 in.) | 343-1270 mm/min (135-500 in./min) |
290-610 A | 25.4-38 mm (1-1.5 in.) | 26-34 V | 2.4 mm (3/32 in.) | 254-825.5 mm/min (100-325 in./min) |
Deposition Data
Current | Deposition Rate | Diameter | Deposition Efficiency (%) | TTW Dist. | Voltage | Wire Feed Speed |
100% CO2 | ||||||
149 A | 1.3 kg/h (2.8 lb/h) | 1.6 mm (1/16 in.) | 80 % | 19 mm (3/4 in.) | 23 V | 254 cm/min (100 in./min) |
168 A | 1.6 kg/h (3.5 lb/h) | 1.6 mm (1/16 in.) | 80 % | 19 mm (3/4 in.) | 24 V | 305 cm/min (120 in./min) |
187 A | 1.9 kg/h (4.2 lb/h) | 1.6 mm (1/16 in.) | 80 % | 19 mm (3/4 in.) | 24 V | 356 cm/min (140 in./min) |
205 A | 2.2 kg/h (4.9 lb/h) | 1.6 mm (1/16 in.) | 80 % | 19 mm (3/4 in.) | 25 V | 406 cm/min (160 in./min) |
223 A | 2.5 kg/h (5.6 lb/h) | 1.6 mm (1/16 in.) | 80 % | 19 mm (3/4 in.) | 25 V | 457 cm/min (180 in./min) |
240 A | 2.9 kg/h (6.3 lb/h) | 1.6 mm (1/16 in.) | 80 % | 19 mm (3/4 in.) | 25 V | 508 cm/min (200 in./min) |
257 A | 3.2 kg/h (7.0 lb/h) | 1.6 mm (1/16 in.) | 81 % | 19 mm (3/4 in.) | 26 V | 559 cm/min (220 in./min) |
273 A | 3.5 kg/h (7.7 lb/h) | 1.6 mm (1/16 in.) | 81 % | 19 mm (3/4 in.) | 26 V | 610 cm/min (240 in./min) |
289 A | 3.8 kg/h (8.4 lb/h) | 1.6 mm (1/16 in.) | 81 % | 19 mm (3/4 in.) | 26 V | 660 cm/min (260 in./min) |
290 A | 5.8 kg/h (12.7 lb/h) | 2.4 mm (3/32 in.) | 86.9 % | 25.4 mm (1 in.) | 27 V | 381 cm/min (150 in./min) |
350 A | 7.7 kg/h (16.9 lb/h) | 2.4 mm (3/32 in.) | 86.3 % | 25.4 mm (1 in.) | 28 V | 508 cm/min (200 in./min) |
410 A | 9.6 kg/h (21.1 lb/h) | 2.4 mm (3/32 in.) | 86 % | 25.4 mm (1 in.) | 29 V | 635 cm/min (250 in./min) |
475 A | 11.3 kg/h (25.0 lb/h) | 2.4 mm (3/32 in.) | 84.8 % | 25.4 mm (1 in.) | 32 V | 762 cm/min (300 in./min) |
Classifications
Grade | E70T-1CH8/T-9CH8 |
Name | AWS A5.20 |
Approvals
Approvals |
A.B.S.- 2SA,2YSA ASME SFA 5.20 AWS A5.20 E70T-1CH8/T-9CH8 CERTIFIED BY C.W.B.- CSA W48 DNV III YMS L.R. - 3S,3YS |
Approvals are based on factory location. Please contact ESAB for more information. |
Typical Weld Metal Analysis %
Typical Weld Metal Analysis % | ||||||||||||||
C | P | S | ||||||||||||
100% CO2 | ||||||||||||||
0.035 % | 0.011 % | 0.015 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.