Dual Shield Prime 81Ni1M H4
A seamless, copper free, cored wire designed to weld thick steel components. The diffusible hydrogen level is consistently below 4mL/100g of deposited weld metal and with the seam of the wire being laser welded this ensures no moisture pick up. The wire is not copper coated, which means there is no chance of copper flakes contaminating feed liners, torches and contact tips. Dual Shield Prime 81Ni1M H4 is designed to weld high strength steels (>500 MPa, >72 ksi yield strength) and provides excellent impact toughness down to -60° C (-76° F). Dual Shield Prime 81Ni1M H4 is designed to be used with Ar/CO2 (M21) shielding gas mixtures.
Typical Charpy V-Notch Properties
as welded m21 shielding gas | ||||
as welded m21 shielding gas | ||||
Typical Tensile Properties
Condition | Elongation | Shielding Gas | Tensile Strength | Yield Strength |
As Welded | 28 % | M21 Shielding gas | 587 MPa (85 ksi) | 533 MPa (77 ksi) |
Deposition Data
Current | 170-310 A |
Deposition Rate | 5.5-13.7 lb/h |
Deposition Rate | 2.5-6.2 kg/h |
Diameter | .045 in. |
Diameter | 1.2 mm |
Voltage | 23-35 V |
Wire Feed Speed | 236.2-649.6 in./min |
Wire Feed Speed | 6.0-16.5 m/min |
Classifications
Weld Metal |
EN ISO 17632-A : T 50 6 1Ni P M21 1 H5 EN ISO 17632-B : T555T1-1M21A-N2-U-H5 SFA/AWS A5.29 : E81T1-Ni1M H4 |
Approvals
Approvals |
ABS 5YQ460SA H5 BV SA5Y46 H5 CE EN 13479 DNV-GL V Y46MS(H5) LR 5Y46S H5 RS 5Y46S H5 |
Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
Alloy Type | C Mn Ni |
Diffusible Hydrogen | < 4 ml/100g |
Shielding Gas | M21 (EN ISO 14175) |
Welding Current | DC+ |
Typical Weld Metal Analysis %
Typical Weld Metal Analysis % | ||||||||||||||
C | Mn | Ni | Si | |||||||||||
M21 Shielding gas | ||||||||||||||
0.03 % | 1.34 % | - | 0.29 % | |||||||||||
M21 shielding gas | ||||||||||||||
- | - | 0.96 % | - |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.