Stoody A-T1
Stoody A-T1 is a gas shielded All Position Flux Cored Wire that results in a deposit that is within the chemical composition requirements of AWS 5.34 ENiCrFe2T1-1/-4.
Features
- AWS Classification: A5.34 ENiCrFe2T1-1/-4
Typical Tensile Properties
| Elongation | Tensile Strength | Yield Strength |
| 45 % | 595 MPa (89.5 ksi) | 340 MPa (51 ksi) |
Deposition Data
| Current | Deposition Type | Diameter | TTW Dist. | Voltage | Wire Feed Speed |
| 75% Ar - 25% CO2 | |||||
| 150-200 A | Full Range | 1.2 mm (.045 in.) | 13 mm (1/2 in.) | 25-26 V | 737-1016 cm/min (290-400 in./min) |
| 200-250 A | Full Range | 1.6 mm (1/16 in.) | 13 mm (1/2 in.) | 26-27 V | 483-699 cm/min (190-275 in./min) |
Classifications
| Grade | ENiCrFe2T1-1/-4 |
| Name | AWS 5.34 |
Typical Weld Metal Analysis %
| C | Cr | Fe | Mn | Mo | Nb | Ni | P | S | Si |
| 0.03 % | 15.0 % | 1.5 % | 2.5 % | 1.9 % | 1.9 % | BAL % | 0.010 % | 0.003 % | 0.3 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.