Shield-Bright 317L
Shield-Bright 317L is recommended for welding Type 317 and 317L stainless steel. It can also be used for Type 316L where additonal weld metal corrosion resistance, including pitting resistance, is required.This is used in industries where there is severe corrosion applications involving sulfuric and sulfurous acids and their salts.
Industries
- Industrial and General Fabrication
- Process
- Pulp and Paper
- Ship/Barge Building
Welding Process
- FCAW (Flux Core)
Typical Tensile Properties
| Shielding Gas | 75% Ar - 25% CO2 | 100% CO2 |
| Tensile Strength | 620 MPa | 600 MPa |
| Yield Strength | 480 MPa | 460 MPa |
| Elongation | 35 % | 34 % |
Classifications
| Classifications |
JIS Z3323 : TS317L-FB1 AWS A5.22 : E317LT1-1/T1-4 |
Approvals
| Society | JIS |
| Approvals are based on factory location. Please contact ESAB for more information. |
Typical Weld Metal Analysis %
| Typical Weld Metal Analysis % | ||||||||||||||
| C | Cr | Mn | Mo | Ni | P | S | Si | Si+Fe | ||||||
| 100% CO2 | ||||||||||||||
| 0.032 % | 18.4 % | 1.20 % | 3.40 % | 12.5 % | 0.021 % | 0.009 % | 0.80 % | 8-15 % | ||||||
| 75% Ar - 25% CO2 | ||||||||||||||
| 0.03 % | 19.50 % | 1.20 % | 3.50 % | 13.0 % | 0.021 % | 0.009 % | 0.85 % | 8-15 % | ||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.