Stoody 309L T-1 AP
Stoody AP stainless steel wires are designed for welding in all positions with either 100% CO2 (X=1) or Argon / CO2 (X=4) gas mixtures. These wires exhibit a spraylike arc transfer, easy slag removal and can be welded over a wide range of parameters.Stoody 309L T-1 AP wires can be used to join AISI 309 steel. They will also join AISI 304 to carbon and low alloy steels. AWS Classification: A5.22 E309LT1-X
Features
- All position weldability
- Economical shielding gas mixtures
- Spraylike arc transfer
- Easy slag removal
- Versatile
Typical Tensile Properties
Shielding Gas | 75% Ar - 25% CO2 | 100% CO2 |
Tensile Strength | 610 MPa (88 ksi) | 600 MPa (86 ksi) |
Yield Strength | 480 MPa (69 ksi) | 440 MPa (64 ksi) |
Elongation | 34 % | 38 % |
Deposition Data
Current | Deposition Type | Diameter | TTW Dist. | Voltage | Wire Feed Speed |
75% Ar - 25% CO2 | |||||
100-170 A | Full Range | 0.9 mm (.035 in.) | 10-13 mm (3/8-1/2 in.) | 25-27 V | 699-1524 cm/min (275-600 in./min) |
130-220 A | Full Range | 1.2 mm (.045 in.) | 10-13 mm (3/8-1/2 in.) | 24-27 V | 856-1435 cm/min (227-565 in./min) |
170-300 A | Full Range | 1.6 mm (1/16 in.) | 10-13 mm (3/8-1/2 in.) | 25-28 V | 394-813 cm/min (155-320 in./min) |
Classifications
Grade | E309LT1-X |
Name | AWS A5.22 |
Typical Weld Metal Analysis %
C | Cr | Fe | Mn | Ni | Si | |||||||||
75% Ar / 25% CO2 | ||||||||||||||
0.03 % | 24.3 % | 19 % | 0.8 % | 12.5 % | 0.9 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.