Stoody

Stoody Brilliant 2101 T-1 AP

The following items have been added to your list


x

Stoody AP stainless steel wires are designed for welding in all positions with either 100% CO2 or Argon / CO2 gas mixtures. These wires exhibit a spray-like arc transfer, easy slag removal, and they can be welded within a wide range of parameters.

BUY NOW


Features

  • Designed for welding in all positions
  • Use with 100% CO2 (X=1) or Argon/CO2 (X=4) gas mixtures
  • Spray-like arc transfer
  • Easy slag removal
  • Can be welded within a wide range of parameters
  • Good balance of corrosion resistance and mechanical properties


Typical Charpy V-Notch Properties

As Welded
Impact Value 66 ft-lb
Impact Value 90 J
As Welded Testing Temperature -40 °C
As Welded Testing Temperature -40 °F

Typical Tensile Properties

ElongationTensile Strength Yield Strength
31 %758 MPa (110 ksi)572 MPa (83 ksi)

Deposition Data

Current Deposition Type Diameter TTW Dist. Voltage Wire Feed Speed
75% Ar - 25% CO2
130-220 A Full Range 1.2 mm (.045 in.) 13 mm (1/2 in.) 24-27 V 856-1435 cm/min (227-565 in./min)
170-300 A Full Range 1.6 mm (1/16 in.) 13 mm (1/2 in.) 25-28 V 394-813 cm/min (155-320 in./min)

Typical Weld Metal Analysis %

C Cr Fe Mn N Ni Si
0.03 % 23.7 % BAL % 0.9 % 0.11 % 8.8 % 0.68 %
x

Part Numbers and Accessories

Select All | Select None

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..