Stoody Brilliant 2209 T-1 AP
Brilliant 2209 T-1 AP is designed for all position welding of duplex stainless steels which contain approximately 22% chromium. The composition is balanced to achieve a microstructure of approximately 50% ferrite and 50% austenite in the weld deposit. The alloy exhibits a spray-like arc transfer, easy slag removal, and can be welded within a wide range of parameters. AWS classification A5.22 E2209T1-X.
Features
- All position weldability
- Spray-like arc transfer
- AWS Classification A5.22 E22091T1-X
Typical Charpy V-Notch Properties
| As Welded | |
| Impact Value | 44 ft-lb |
| Impact Value | 60 J |
| As Welded Testing Temperature | -40 °C |
| As Welded Testing Temperature | -40 °F |
Typical Tensile Properties
| Elongation | Shielding Gas | Tensile Strength | Yield Strength |
| 27.5 % | 100% CO2 | 786 MPa (114 ksi) | 607 MPa (88 ksi) |
Deposition Data
| Current | Deposition Type | Diameter | TTW Dist. | Voltage | Wire Feed Speed |
| 75% Ar - 25% CO2 | |||||
| 130-220 A | Full Range | 1.2 mm (.045 in.) | 13 mm (1/2 in.) | 24-27 V | 856-1435 cm/min (227-565 in./min) |
| 170-300 A | Full Range | 1.6 mm (1/16 in.) | 13 mm (1/2 in.) | 25-28 V | 394-813 cm/min (155-320 in./min) |
Classifications
| Grade | E2209T1-X |
| Name | AWS A5.22 |
Typical Weld Metal Analysis %
| C | Cr | Fe | Mn | Mo | N | Ni | Si |
| 0.38 % | 22.3 % | BAL % | 1.2 % | 3.2 % | 0.10 % | 9.6 % | 0.5 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.