Stoody Brilliant 2594 T-1 AP
Brilliant 2594 T-1 AP is designed for all position welding of super duplex stainless steels as well as used to weld low alloy steels to duplex stainless steels. The alloy exhibits a spray-like arc transfer, easy slag removal, and can be welded within a wide range of parameters. AWS classification A5.22 E2594T1-X.
Features
- All position weldability
- Spray-like arc transfer
- AWS Classification A5.22 E2594T1-X
Typical Charpy V-Notch Properties
| As Welded | |
| Impact Value | 33 ft-lb |
| Impact Value | 45 J |
| As Welded Testing Temperature | -40 °C |
| As Welded Testing Temperature | -40 °F |
Typical Tensile Properties
| Elongation | Shielding Gas | Tensile Strength | Yield Strength |
| 25 % | 100% CO2 | 869 MPa (126 ksi) | 679 MPa (99 ksi) |
Deposition Data
| Current | Deposition Type | Diameter | TTW Dist. | Voltage | Wire Feed Speed |
| 75% Ar - 25% CO2 | |||||
| 130-220 A | Full Range | 1.2 mm (.045 in.) | 13 mm (1/2 in.) | 24-27 V | 856-1435 cm/min (227-565 in./min) |
| 170-300 A | Full Range | 1.6 mm (1/16 in.) | 13 mm (1/2 in.) | 25-28 V | 394-813 cm/min (155-320 in./min) |
Classifications
| Grade | E2594T1-X |
| Name | AWS A5.22 |
Typical Weld Metal Analysis %
| C | Cr | Fe | Mn | Mo | N | Ni | Si |
| 0.03 % | 24.7 % | BAL % | 0.7 % | 4.0 % | 0.2 % | 8.9 % | 0.6 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.