ESAB

OK Autrod 1070

The following items have been added to your list


x

OK Autrod 1070 is highly resistant to chemical attack and weathering. It is a relatively soft alloy that is very formable and is used extensively in thin gauge and foil products. It has good welding characteristics. A desirable characteristic of the alloy is the bright finish obtained by anodising. Non-Heat treatable.

BUY NOW


Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded45 %75 MPa (11 ksi)35 MPa (5 ksi)

Recommended Welding Parameters

Current Voltage Wire Diameter
140-260 A 20-29 V 1.2 mm (0.047 in.)
190-350 A 25-30 V 1.6 mm (1/16 in.)
90-210 A 15-26 V 1.0 mm (0.040 in.)
190-350 A 25-30 V 2.0 mm (5/64 in.)
280-400 A 26-31 V 2.4 mm (3/32 in.)

Classifications

2
Grade S Al 1070 (Al99,7)
Name EN ISO 18273

Consumable Characteristics

Alloy Type Al
Shielding Gas I1, I3 (EN ISO 14175)

Typical Weld Metal Analysis %

Typical Wire Composition %
Al Cu Fe Mn Si V
99.80 % 0.01 % 0.13 % 0.01 % 0.02 % 0.01 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : OK Autrod 1070
1801104620 Find a distributor
1801109870 Find a distributor
1801124620 Find a distributor
1801129870 Find a distributor
1801169870 Find a distributor
1801209480 Find a distributor

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..