ESAB

OK Autrod 4008

The following items have been added to your list


x

Alloy 4008 has controlled lower levels of impurities than those present in alloys 4010 and 356.0. It is a product that meets the chemistry requirements of AMS 4181. Alloys 356.0, A356.0 and A357.0 are typically used to manufacture sand and permanent mold castings. Alloy 4008 is excellent choice to join or repair these castings, and if needed, it can be heat treated to increased mechanical properties.

BUY NOW


Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded18 %165 MPa (24 ksi)55 MPa (8 ksi)

Recommended Welding Parameters

Current Voltage Wire Diameter
90-210 A 15-26 V 1.6 mm (1/16 in.)
90-210 A 15-26 V 2.0 mm (5/64 in.)

Classifications

2
Grade S Al Z (AlSi7MgTi)
Name EN ISO 18273

Approvals

Approvals CE EN 13479
DB 61.039.09
VdTÜV 12189
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type AlSiMg
Shielding Gas I1, I3 (EN ISO 14175)

Typical Weld Metal Analysis %

Typical Wire Composition %
Al Cu Fe Mg Mn Si Ti Zn
Rem % 0.02 % 0.06 % 0.4 % 0.01 % 7.0 % 0.1 % 0.01 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : OK Autrod 4008
1806169440 Find a distributor

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..