ESAB

OK Autrod 5556

The following items have been added to your list


x

Continuous solid wire suitable for welding of aluminium alloys with up to approx. 5 % Mg that are not age-hardenable and alloys where a higher tensile strength is required. The corrosion resistance in marine atmosphere is high.

BUY NOW


Typical Charpy V-Notch Properties

As Welded
Impact Value 18 ft-lb
Impact Value 24 J
Testing Temperature 68 °F
Testing Temperature 20 °C

Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded25 %295 MPa (43 ksi)145 MPa (21 ksi)

Recommended Welding Parameters

Current Voltage Wire Diameter
140-260 A 20-29 V 1.2 mm (0.047 in.)
180-210 A 22-26 V 1.2 mm (0.047 in.)
125-150 A 20-24 V 1.2 mm (0.047 in.)
170-240 A 24-28 V 1.2 mm (0.047 in.)
190-350 A 25-30 V 1.6 mm (1/16 in.)
240-300 A 22-27 V 1.6 mm (1/16 in.)
190-260 A 21-26 V 1.6 mm (1/16 in.)
290-340 A 26-30 V 1.6 mm (1/16 in.)
260-310 A 22-27 V 1.6 mm (1/16 in.)
280-320 A 24-28 V 1.6 mm (1/16 in.)
90-210 A 15-26 V 1.0 mm (0.040 in.)
280-400 A 26-31 V 2.4 mm (3/32 in.)

Classifications

Wire Electrode SFA/AWS A5.10 : ER5556
EN ISO 18273 : S Al 5556A (AlMg5Mn1Ti)

Approvals

Approvals ABS ER 5556
CWB ER5556
ClassNK KA15WCG (I)
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type AlMgMn
Shielding Gas I1, I2, I3 (EN ISO 14175)

Typical Weld Metal Analysis %

Typical Wire Composition %
Al Cr Cu Fe Mg Mn Si Ti Zn
Rem % 0.10 % 0.01 % 0.12 % 5.2 % 0.7 % 0.05 % 0.080 % 0.005 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : OK Autrod 5556
1818129870 Find a distributor
1818129620 Find a distributor

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..