Stoody C-M
Stoody C-M is a nickel-based fabricated alloy cored wire for automatic/semi-automatic welding that produces a deposit resistant to high heat and corrosion accompanied by abrasion and/or impact. It is machinable but work hardens and can be applied in multiple layers.
Features
Welding Procedures/Characteristics:
- An automatic/semi-automatic wire (DECP) that can be applied in multiple layers.
- Hot Forge Dies
- Hot Shear Blades
- Forging Hammer Dies
- Mill Guides
- Shafts
-
Applications:
Typical Tensile Properties
Shielding Gas |
100% Ar |
Deposition Data
Current | 280-310 A |
Deposition Type | 3 |
Diameter | 1/16 in. |
Diameter | 1.6 mm |
Shielding Gas | 100% Ar |
TTW Dist. | 1/2-3/4 in. |
TTW Dist. | 13-19 mm |
Voltage | 26-28 V |
Wire Feed Speed | 190-230 in./min |
Wire Feed Speed | 483-584 cm/min |
Typical Weld Metal Analysis %
C | Cr | Fe | Mn | Mo | Ni | Si | W |
0.02 % | 15.8 % | 5.0 % | 0.1 % | 16.0 % | BAL % | 0.2 % | 4.0 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.