Stoody

Stoody SOS 307 MOD

The following items have been added to your list


x

Stoody's "SOS" wires offer the productivity and efficiencies of continuous welding wire and the convenience and low cost of open arc (gas-less) welding. Welding can be done indoors or outdoors – even in moderate wind or draft conditions. Weldability is excellent, producing weld deposits that are sound and clean with flat to slightly convex bead shape. Stoody "SOS" wire deposits have lower percentage of penetration than GMAW deposits at the same current levels which means less dilution and distortion. Stoody "SOS" wires can be used as a direct replacement for solid stainless wires or electrodes of the same grade both in fabricating and overlay applications.

Stoody's "SOS" wires do not require specialized equipment. For best results, contant voltage, direct current power source is recommended.

BUY NOW


Recommended Welding Parameters

Current TTW Dist. Voltage Wire Diameter Wire Feed Speed
High
320 A 32 mm (1 1/4 in.) 30 V 2.4 mm (3/32 in.) 9.8 m/min (250 in./min)
Low
275 A 25 mm (1 in.) 28 V 2.4 mm (3/32 in.) 4.5 m/min (175 in./min)
Optimum
300 A 25 mm (1 in.) 29 V 2.4 mm (3/32 in.) 5.7 m/min (225 in./min)

Typical Weld Metal Analysis %

Typical Weld Metal Analysis %
C Cr Cu Mn Mo N Nb Ni Si Si+Fe
0.08 % 20.0 % 0.01 % 7.0 % 0.05 % 0.1 % 0.02 % 8.5 % 0.8 % 5 %
x

Part Numbers and Accessories

Select All | Select None

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..