ESAB

OK Autrod NiFeCr-1

The following items have been added to your list


x

OK Autrod NiFeCr-1 is developed for overlay welding of low alloy steel pipes in the oil and gas industry. OK Autrod NiFeCr-1 can also be used to join 825 and materials of similar chemical composition using GTAW and GMAW.

BUY NOW


Typical Charpy V-Notch Properties

As Welded
Impact Value 141 ft-lb
Impact Value 190 J
Testing Temperature -321 °F
Testing Temperature -196 °C

Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded48 %560 MPa (81 ksi)350 MPa (51 ksi)

Deposition Data

Current 130-240 A
Deposition Rate 6.6-12. lb/h
Deposition Rate 3.0-5.7 kg/h
Diameter 0.045 in.
Diameter 1.14 mm
Voltage 22-28 V
Wire Feed Speed 236-472 in./min
Wire Feed Speed 6.0-12.0 m/min

Classifications

Classifications SFA/AWS A5.14 : ERNiFeCr-1
EN ISO 18274 : S Ni 8065

Consumable Characteristics

Alloy Type Nickel alloy (22% Fe, 22% Cr, 3% Mo)
Shielding Gas I1, I3 (EN ISO 14175)

Typical Weld Metal Analysis %

Typical Wire Composition %
C Cr Cu Fe Mn Mo Ni Si Ti
0.01 % 21 % 2.3 % 24 % 0.5 % 3.0 % bal % 0.3 % 0.7 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : OK Autrod NiFeCr-1
1990119500 Find a distributor
1990119820 Find a distributor
1990119320 Find a distributor
1990119570 Find a distributor

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..