OK Autrod 308H
A continous solid corrosion resisting chromium-nickel wire for welding of austenitic chromium nickel alloys of 18% Cr - 8% Ni-type. OK Autrod 308H has a good general corrosion resistance. The alloy has a high carbon content which makes this alloy suitable for applications used at higher temperatures. The alloy is used in chemical and petrochemical plants for welding of pipes, cyclones and boilers.
Deposition Data
Current | Deposition Rate | Diameter | Voltage | Wire Feed Speed |
50-140 A | 0.8-2.7 kg/h (1.8-6.0 lb/h) | 0.8 mm (0.030 in.) | 16-22 V | 3.4-11.0 m/min (134-433 in./min) |
80-190 A | 1.1-3.1 kg/h (2.4-6.8 lb/h) | 1.0 mm (0.040 in.) | 16-24 V | 2.9-8.4 m/min (114-331 in./min) |
180-280 A | 2.6-4.5 kg/h (5.7-9.9 lb/h) | 1.2 mm (0.047 in.) | 20-28 V | 4.9-8.5 m/min (193-335 in./min) |
Classifications
Wire Electrode |
EN ISO 14343-A : G 19 9 H SFA/AWS A5.9 : ER308H |
Approvals
Grade | 1.2MM |
Society | NAKS/HAKC |
Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
Alloy Type | Austenitic 19% Cr - 9% Ni - High C |
Shielding Gas | M12, M13 (EN ISO 14175) |
Typical Weld Metal Analysis %
Typical Wire Composition % | ||||||||||||||
C | Cr | FN WRC-92 | Mn | N | Nb | Ni | Si | |||||||
0.05 % | 19.8 % | 9 % | 1.9 % | 0.06 % | 0.01 % | 9.2 % | 0.5 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.