OK Autrod 308L
A continuous solid corrosion resisting chromium-nickel wire. The alloy has a low carbon content which makes this alloy particularly recommended were there is a risc of intergranular corrosion. The alloy is widely used in the chemical and food processing industries as well as for pipes, tubes and boilers. For joining of stainless steels of 18% Cr - 8% Ni-type and Nb-stabilized steels of the same type if the service temperature will not exceed 350°C.
Typical Charpy V-Notch Properties
| as welded | ||||
Typical Tensile Properties
| As welded | As welded | |
| Shielding Gas | Tested at 350°C (662°F). | |
| Tensile Strength | 490 MPa (71 ksi) | 620 MPa (90 ksi) |
| Yield Strength | 370 MPa (54 ksi) | 450 MPa (65 ksi) |
| Elongation | 25 % | 36 % |
Deposition Data
| Current | Deposition Rate | Diameter | Voltage | Wire Feed Speed |
| 80-240 A | 1.5-6.0 kg/h (3.3-13.2 lb/h) | 1.0 mm (.040 in.) | 15-28 V | 4.0-16.0 m/min (157.5-630 in./min) |
| 55-160 A | 0.9-4.1 kg/h (2.0-9.0 lb/h) | 0.8 mm (.030 in.) | 15-24 V | 4.0-17.0 m/min (157.5-669 in./min) |
| 55-160 A | 0.9-4.1 kg/h (2.0-9.0 lb/h) | 0.9 mm (.035 in.) | 15-24 V | 4.0-17.0 m/min (157.5-669 in./min) |
| 80-240 A | 1.5-6.0 kg/h (3.3-13.2 lb/h) | 1.14 mm (.045 in.) | 15-28 V | 4.0-16.0 m/min (157.5-630 in./min) |
| 100-300 A | 1.6-7.5 kg/h (3.5-16.5 lb/h) | 1.2 mm (.045 in.) | 14-28.5 V | 3.0-14.0 m/min (118-551 in./min) |
Classifications
| Wire Electrode |
Werkstoffnummer : ~1.4316 EN ISO 14343-A : G 19 9 L SFA/AWS A5.9 : ER308L |
Approvals
| Approvals |
ABS ER308/308L CE EN 13479 NAKS/HAKC 1.0 mm |
| Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
| Alloy Type | Austenitic (with approx. 8 % ferrite) 19% Cr - 9% Ni - Low C |
| Shielding Gas | M12, M13 (EN ISO 14175) |
Typical Weld Metal Analysis %
| Typical Wire Composition % | ||||||||||||||
| C | Cr | Cu | FN WRC-92 | Mn | Mo | N | Ni | P | S | Si | ||||
| 0.02 % | 19.8 % | 0.15 % | 9 % | 1.9 % | 0.20 % | 0.05 % | 9.8 % | - | - | 0.4 % | ||||
| Typical Weld Metal Analysis % | ||||||||||||||
| 0.020 % | 20.0 % | 0.05 % | - | 1.6 % | 0.05 % | - | 10.0 % | 0.015 % | 0.015 % | 0.4 % | ||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.