Stoody SOS 423
The SOS 423 deposit is a stabilized martensitic stainless steel. It is a fire-crack resistant alloy that has excellent corrosion and wear resistance. The wire is specifically designed for a two-layer over-lay on continuous caster rolls. It is designed to be used with SOS 430 as the underlay, and used as a 2-layer overlay in the untempered condition for best wear and corrosion resistance. It can be applied using either a weave bead or stringer bead technique. On smaller rolls, the stringer bead technique is preferred.
Features
- Hardness, HRC (as welded) 43
- (2 layers on a single layer of SOS 430)
Industries
- Repair and Maintenance
Welding Process
- GMAW (MIG/MAG)
Recommended Welding Parameters
Current | TTW Dist. | Voltage | Wire Diameter | Wire Feed Speed |
380-460 A | 32-38 mm (1 1/4-1 1/2 in.) | 27-28 V | 3.2 mm (1/8 in.) | 2.3-3.6 m/min (90-140 in./min) |
275-350 A | 25-32 mm (1-1 1/4 in.) | 25-28 V | 2.4 mm (3/32 in.) | 3.8-4.6 m/min (150-180 in./min) |
220-300 A | 25-32 mm (1-1 1/4 in.) | 25-27 V | 1.6 mm (1/16 in.) | 5.6-7.6 m/min (220-300 in./min) |
Consumable Characteristics
Alloy Type | Stabilized Martensitic Stainless Steel |
0 |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.