Exaton

Exaton 308/308L T1

The following items have been added to your list


x

FCAW wire for 18%Cr - 8%Ni stainless steel, For all-position welding. For welding types 301, 302, 304, 304L, 308 and 308L of stainless steel. May be used for welding types 321 and 347 if service temperature does not exceed 500°F(260°C). Low carbon content minimizes carbide precipitation. Ferrite values will lower as impact toughness increases. Carbon content 0.04% maximum.

BUY NOW


Typical Charpy V-Notch Properties

as welded c1 shielding gas

Typical Tensile Properties

Condition As Welded As Welded
Shielding Gas C1 Shielding gas M21 Shielding Gas
Tensile Strength 568 MPa (82 ksi) 580 MPa (84 ksi)
Yield Strength 372 MPa (54 ksi) 410 MPa (59 ksi)
Elongation 61 % 44 %

Deposition Data

Current 130-220 A
Deposition Rate 4.2-10. lb/h
Deposition Rate 1.9-4.6 kg/h
Diameter 0.045 in.
Diameter 1.2 mm
Voltage 24-29 V
Wire Feed Speed 228-567 in./min
Wire Feed Speed 5.8-14.4 m/min

Classifications

Weld Metal SFA/AWS A5.22 : E308LT1-4
SFA/AWS A5.22 : E308LT1-1
KS D 3612 : YF 308LC
EN ISO 17633-A : T 19 9 L P C1 2
EN ISO 17633-A : T 19 9 L P M21 2
JIS Z 3323 : YF 308LC

Consumable Characteristics

Alloy Type C Cr Ni
Shielding Gas M21, C1 (EN ISO 14175)
Welding Current DC+

Typical Weld Metal Analysis %

Typical Weld Metal Analysis %
C Cr Mn Ni P S Si
C1 Shielding Gas
- - - - - 0.007 % -
C1 shielding gas
0.025 % 19.1 % 1.10 % 10.0 % 0.025 % - 0.70 %
M21 Shielding Gas
0.030 % 19.3 % 1.20 % 10.1 % 0.025 % 0.007 % 0.90 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : Exaton 308/308L T1
2E308LT104533 Find a distributor
2E308LT106333 Find a distributor

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..