Exaton

Exaton 309/309L T1

The following items have been added to your list


x

FCAW wire for 22%Cr - 12%Ni stainless steel, For all-position welding. Designed for welding type 309 wrought or cast forms, but used extensively for welding type 304 to mild or carbon steel. Also used for welding 304 clad sheets and for applying stainless steel sheet linings to carbon steel. Carbon content 0.04% maximum.

BUY NOW


Typical Charpy V-Notch Properties

as welded c1 shielding gas

Typical Tensile Properties

Condition As Welded As Welded
Shielding Gas M21 Shielding Gas C1 Shielding gas
Tensile Strength 600 MPa (87 ksi) 539 MPa (78 ksi)
Yield Strength 480 MPa (70 ksi) 392 MPa (57 ksi)
Elongation 35 % 51 %

Deposition Data

Current 130-220 A
Deposition Rate 4.2-10. lb/h
Deposition Rate 1.9-4.6 kg/h
Diameter 0.045 in.
Diameter 1.2 mm
Voltage 24-29 V
Wire Feed Speed 228-567 in./min
Wire Feed Speed 5.8-14.4 m/min

Classifications

Weld Metal SFA/AWS A5.22 : E309LT1-4
SFA/AWS A5.22 : E309LT1-1
KS D 3612 : YF-309LC
EN ISO 17633-A : T 23 12 L P C1 2
EN ISO 17633-A : T 23 12 L P M21 2
JIS Z 3323 : YF-309LC

Consumable Characteristics

Alloy Type C Cr Ni
Shielding Gas M21, C1 (EN ISO 14175)
Welding Current DC+

Typical Weld Metal Analysis %

Typical Weld Metal Analysis %
C Cr Mn Ni P S Si
C1 Shielding Gas
0.029 % - - - 0.024 % 0.007 % -
C1 Shielding gas
- 23.1 % - 12.4 % - - -
C1 shielding gas
- - 1.10 % - - - 0.80 %
M21 Shielding Gas
0.030 % 23.5 % 1.30 % 12.5 % 0.024 % 0.007 % 0.90 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : Exaton 309/309L T1
2E309LT103533 Find a distributor
2E309LT104533 Find a distributor
2E309LT106333 Find a distributor

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..