Exaton

Exaton NiCrMo-4

The following items have been added to your list


x

NiCrMo-4 is a low carbon nickel-chrome-molybdenum alloy of type alloy C-276. It is a versatile alloy with excellent wet corrosion resistance in oxidizing and especially in reducing media. However, in oxidizing chloride containing environments alloy UNS N06022 (2.4602) is preferred where NiCrMo-10 is a better matching welding consumable. Applications for NiCrMo-4 are found in aggressively corrosive media such as chemical processing plants, pollution control, pulp and paper production, waste treatment and for the recovery of sour natural gas. NiCrMo-4 is used for joining alloy UNS N10276 (2.4819) and other nickel-chrome-molybdenum alloys. It can also be used for dissimilar metal joining of nickel alloys, stainless steels and low-alloy steels. NiCrMo-4 can be used for surfacing low alloyed steels. Applications for NiCrMo-4 are found in cryogenics, components in pulp and paper plants such as bleaching vessels, flue gas scrubber systems, components in sour-gas service, sulphuric acid coolers, chlorine gas, hypochlorite and chlorine dioxide atmosphere. NiCrMo-4 is also used in combustion-resistant components for high pressure oxygen service. It is used for MIG/MAG welding.

BUY NOW


Typical Charpy V-Notch Properties

as welded

Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded43 %735 MPa (107 ksi)500 MPa (73 ksi)

Recommended Welding Parameters

Current Voltage Wire Diameter Wire Feed Speed
40-120 A 15-19 V 0.8 mm (0.030 in.) 4.0-8.0 m/min (157-315 in./min)
150-260 A 24-29 V 1.2 mm (0.047 in.) 3.0-10.0 m/min (118-394 in./min)
230-350 A 25-30 V 1.6 mm (1/16 in.) 3.0-5.0 m/min (118-197 in./min)

Classifications

Wire Electrode SFA/AWS A5.14 : ERNiCrMo-4
EN ISO 18274 : S Ni 6276 (NiCr15Mo16Fe6W4)
Werkstoffnummer : ~2.4819

Approvals

Grade EN 13479
Society CE
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type Nickel alloy - 16% Cr - 16% Mo - 5% Fe - 3.5 % W - Low C
Shielding Gas M12 (EN ISO 14175)

Typical Weld Metal Analysis %

Typical Wire Composition %
C Co Cr Cu Fe Mn Mo Ni P S Si V W
0.007 % 0.02 % 16 % 0.02 % 5.8 % 0.5 % 16 % 58 % 0.005 % 0.002 % 0.02 % 0.03 % 3.7 %
Typical Weld Metal Analysis %
0.01 % 0.01 % 16 % 0.03 % 6 % 0.5 % 16 % 58 % 0.005 % 0.001 % 0.04 % 0.02 % 3.6 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : Exaton NiCrMo-4
S983089820 Find a distributor
S983129820 Find a distributor
S983169820 Find a distributor

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..