Stoody 105B
Stoody 105B deposit has very good resistance to metal-to-metal wear.
Features
- The deposits that are readily machinable with carbide tools.
- Multiple layer, crackfree deposits can be obtained.
- When more than 4 layers are required, an underbase of Stoody® 104 is recommended.
- Deposits are difficult to flame cut.
Typical Tensile Properties
Deposition Data
Current | Deposition Type | Diameter | TTW Dist. | Voltage |
350-400 A | Full Range | 3.2 mm (1/8 in.) | 25-38 mm (1-1 1/2 in.) | 28-30 V |
425-475 A | Full Range | 4.0 mm (5/32 in.) | 25-38 mm (1-1 1/2 in.) | 28-30 V |
350-400 A | Subarc | 3.2 mm (1/8 in.) | ||
425-475 A | Subarc | 4.0 mm (5/32 in.) |
Typical Weld Metal Analysis %
C | Cr | Fe | Other |
0.16 % | 2.3 % | BAL % | 3.5 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.