Stoody 107
Stoody 107 deposit has good resistance to metal-tometal wear, excellent impact resistance, good compressive strength, and resistance to plastic deformation. Multiple layer check-free deposits can be obtained up to ¾" thick.
Features
- Deposits are readily machinable with carbide tools and can be flame cut.
- Stoody® 107 can be used for both build-up and hardfacing on rollers and idlers.
Typical Tensile Properties
Deposition Data
| Current | Deposition Type | Diameter | TTW Dist. | Voltage |
| 350-400 A | Subarc | 3.2 mm (1/8 in.) | ||
| 425-475 A | Subarc | 4.0 mm (5/32 in.) | ||
| 350-400 A | Full Range | 3.2 mm (1/8 in.) | 32-38 mm (1 1/4-1 1/2 in.) | 29-31 V |
| 425-475 A | Full Range | 4.0 mm (5/32 in.) | 32-38 mm (1 1/4-1 1/2 in.) | 29-31 V |
Typical Weld Metal Analysis %
| C | Cr | Fe | Other |
| 0.5 % | 2.0 % | BAL % | 3.0 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.