OK Tigrod 1070
OK Tigrod 1070 is highly resistant to chemical attack and weathering. It is a relatively soft alloy that is very formable and is used extensively in thin gauge and foil products. It has good welding characteristics. A desirable characteristic of the alloy is the bright finishes obtained by anodising. Non-Heat treatable.
Typical Tensile Properties
| Condition | Elongation | Tensile Strength | Yield Strength |
| As Welded | 33 % | 75 MPa (11 ksi) | 35 MPa (5 ksi) |
Classifications
| 2 | |
| Grade | S Al 1070 (Al99,7) |
| Name | EN ISO 18273 |
Consumable Characteristics
| Alloy Type | Al |
| Shielding Gas | I1, I3 (EN ISO 14175) |
Typical Weld Metal Analysis %
| Typical Wire Composition % | ||||||||||||||
| Al | Cu | Fe | Mn | Si | V | |||||||||
| 99.80 % | 0.01 % | 0.13 % | 0.01 % | 0.02 % | 0.01 % | |||||||||
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.