ESAB

OK Tigrod 5087

The following items have been added to your list


x

Bare welding rod suitable for welding of aluminium alloys with up to 5 % Mg and alloys where a higher tensile strength is required. The alloying element Zr gives improved properties against hot cracking during solidification.

BUY NOW


Typical Charpy V-Notch Properties

As Welded
Impact Value 26 ft-lb
Impact Value 35 J
Testing Temperature 68 °F
Testing Temperature 20 °C

Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded30 %280 MPa (41 ksi)130 MPa (19 ksi)

Classifications

Wire Electrode EN ISO 18273 : S Al 5087 (AlMg4,5MnZr)
SFA/AWS A5.10 : R5087

Approvals

Approvals CE EN 13479
DB 61.039.08
VdTÜV 05796
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type AlMgMn
Shielding Gas I1, I2, I3 (EN ISO 14175)

Typical Weld Metal Analysis %

Typical Wire Composition %
Al Cr Cu Fe Mg Mn Si Ti Zn Zr
Rem % 0.08 % 0.01 % 0.12 % 4.7 % 0.8 % 0.04 % 0.08 % 0.01 % 0.11 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : OK Tigrod 5087
181724R120 Find a distributor
181724R150 Find a distributor
181732R120 Find a distributor
181732R150 Find a distributor
181724R12E Find a distributor
181732R12E Find a distributor

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..