OK Tigrod 5556A
Bare welding rod suitable for welding aluminium alloys with up to approx. 5% Mg that are not age hardenable and alloys where a higher tensile strength is required. The corrosion resistance in a marine atmosphere is very good.
Typical Charpy V-Notch Properties
| As Welded | |
| Impact Value | 25 J |
| Testing Temperature | +20 °C |
Typical Tensile Properties
| Condition | Elongation | Tensile Strength | Yield Strength |
| As Welded | 25 % | 295 MPa | 145 MPa |
Deposition Data
| Diameter |
| 3.2 mm |
| 2.4 mm |
| 4 mm |
| 1.6 mm |
Classifications
| Classifications |
SFA/AWS A5.10 : R5556 EN ISO 18273 : S Al 5556A (AlMg5Mn) |
| Approvals are based on factory location. Please contact ESAB for more information. |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.