ESAB

OK Tigrod NiCu-7

The following items have been added to your list


x

Bare nickel based welding rods alloyed with 30 % Cu for welding of base materials of the same type. Can also be used to join these alloys to steel. The weld metal has good resistance to flowing seawater and has high strength and toughness over a rather wide temperature range. Has also good resistance to hydrofluoric acid, sulfuric acid, alkalis etc. Can be used for welding of similar types of base materials which are age-hardenable with small additions of Ti and Al.

BUY NOW


Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded35 %520 MPa (75 ksi)300 MPa (44 ksi)

Classifications

Wire Electrode SFA/AWS A5.14 : ERNiCu-7
EN ISO 18274 : S Ni 4060 (NiCu30Mn3Ti)

Approvals

Approvals VdTÜV 12661 (MV)
VdTÜV 12669 (FP)
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type Alloyed nickel (Ni + 30 % Cu + 2 % Ti + 2 % Fe)
Shielding Gas I1 (EN ISO 14175)

Typical Weld Metal Analysis %

Typical Wire Composition %
Al C Cu Fe Mn Nb Nb+Ta Ni P S Si Ta Ti
0.03 % 0.03 % 28 % 2 % 3 % - < 0.5 % 64 % - - 0.3 % - 2 %
Typical Weld Metal Analysis %
0.1 % 0.01 % 30 % 0.7 % 3.2 % 0.002 % 0.005 % 64 % 0.001 % 0.001 % 0.06 % 0.003 % 1.8 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : OK Tigrod NiCu-7
199316R150 Find a distributor
199320R150 Find a distributor
199324R150 Find a distributor

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..