OK Tigrod 309LSi
Bare corrosion resistant chromium-nickel welding rod for welding of similar steels, wrought and cast steels of 23% Cr-12% Ni types. The alloy is also used for welding of buffer layers on CMn steels and welding of dissimilar joints. When using the wire for buffer layers and dissimilar joints it is necessary to control the dilution of the weld. OK Tigrod 309LSi has a good general corrosion resistance. The higher silicon content improves the welding properties, such as wetting.
Typical Charpy V-Notch Properties
as welded | ||||
Typical Tensile Properties
Condition | Elongation | Tensile Strength | Yield Strength |
As Welded | 35 % | 610 MPa (88 ksi) | 475 MPa (69 ksi) |
Classifications
Wire Electrode |
SFA/AWS A5.9 : ER309LSi EN ISO 14343-A : W 23 12 L Si |
Approvals
Approvals |
CE EN 13479 DB 43.039.17 NAKS/HAKC 2.4mm VdTÜV 12489 |
Approvals are based on factory location. Please contact ESAB for more information. |
Consumable Characteristics
Alloy Type | Austenitic (with approx. 8 % ferrite) 24 % Cr - 13 % Ni - Low C |
Shielding Gas | I1 (EN ISO 14175) |
Typical Weld Metal Analysis %
Typical Wire Composition % | ||||||||||||||
C | Cr | Cu | FN WRC-92 | Mn | Mo | N | Nb | Ni | P | S | Si | |||
0.016 % | 23.3 % | 0.1 % | 9 % | 1.9 % | 0.1 % | 0.09 % | - | 13.7 % | 0.019 % | 0.004 % | 0.7 % | |||
Typical Weld Metal Analysis % | ||||||||||||||
0.01 % | 23 % | 0.1 % | 8 % | 1.8 % | 0.1 % | 0.09 % | 0.01 % | 13.5 % | 0.015 % | 0.003 % | 0.7 % |
Part Numbers and Accessories
ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.