ESAB

OK Tigrod 317L

The following items have been added to your list


x

Bare corrosion resisting chromium-nickel-molybdenum welding rods for welding of austenitic stainless alloys of 19% Cr 9% Ni 3% Mo types. OK Tigrod 317L has a good resistance to general corrosion and pitting due to its high content of molybdenium. The alloy has a low carbon content which makes this alloy particularly recommended were there is a risk of intergranular corrosion. The alloy is used in severe corrosion conditions such as in the petrochemical , pulp and paper industries.

BUY NOW


Typical Charpy V-Notch Properties

as welded

Typical Tensile Properties

ConditionElongationTensile Strength Yield Strength
As Welded45 %600 MPa (87 ksi)390 MPa (57 ksi)

Deposition Data

Diameter
3.2 mm
2.4 mm
2 mm
1.6 mm

Classifications

Wire Electrode SFA/AWS A5.9 : ER317L
EN ISO 14343-A : W18 15 3 L
Approvals are based on factory location. Please contact ESAB for more information.

Consumable Characteristics

Alloy Type Austenitic (with approx. 8 % ferrite) 19% Cr - 12% Ni - 3% Mo - Low C
Shielding Gas I1 (EN ISO 14175)

Typical Weld Metal Analysis %

Typical Wire Composition %
C Cr FN WRC-92 Mn Mo N Ni Si
0.01 % 18.9 % 7 % 1.4 % 3.6 % 0.05 % 13.6 % 0.4 %
x

Part Numbers and Accessories

Select All | Select None

Check box to add

Part Numbers : OK Tigrod 317L
163416R150 Find a distributor
163424R150 Find a distributor

ESAB EQUIPMENT WARRANTIES ARE VALID ONLY WHEN PURCHASED THROUGH AN ESAB AUTHORIZED DEALERSHIP.

x
x

x

Loading..